You will need to replace the blade of your circular saw blade if you are a contractor or just a regular user of power tools.
Circular saw blades can quickly become dull, so it is essential to have a sharp blade to ensure accurate cuts.
To change the blade of a Makita circular-saw, first unplug the saw. Next, remove the throat plate and blade guard. Next, loosen the arbor nuts and then remove the old blade to replace it.
Continue reading to learn more. In this blog post I will show how to change the blade of your Makita circularsaw in just a few steps. Keep your blades sharp and safe!
How To Change The Blade On Makita Circular Saws? Step By Step Guide
It is important to maintain your tools in order to get the best out of them, and ensure they last a long while. It is easy to change the blade of your Makita circularsaw.
1. Unplug Your Saw
Before you start any work, ensure that the saw is unplugged. A running circular saw blade should not be changed by anyone. This could lead to serious injuries. You can simply remove the extension cord from an area where it is plugged in.
2. Take Out The Blade Guard
Take a look at your circular saw to locate the blade guard. You will need to take off the plastic blade guard on most circular saw models in order to change your blades.
You can remove the blade guard with a flat-head screwdriver. If it isn’t held down with screws, it should pop off. It may be necessary to use some force to get it out.
3. Take Out The Blade Screws And Loosen Them
Locate the two-blade screws at either end of your circular saw and use a wrench or an ratchet to loosen them. ).
After loosening both screws, gently pull your blade toward you until it is completely free from your saw.
4. Place The New Blade On The Saw
Place your blade in its original packaging. Make sure that your blade is in its sockets. Then push down to lock them in place. Be careful when using a circular knife’s sharp edges!
I use the best Makita circular saw blade
5. Replace The Blade Screws And Tighten Them
After you have placed the blades into their sockets, push down and tighten them with a suitable tool. You may need a wrench or an ratchet. Now you can plug the saw back in to verify that everything works properly.
How to change the blade of a Makita circular saw
Special Considerations For Makita Circular Saw Blades
All Makita circular saw blades have teeth that are designed to cut in one direction. This is towards the outside of your circle.
You should be careful when changing your blade. Reversing it could result in serious injury.
A metal replacement blade is an option if you don’t want to replace the entire blade of your circular saw. These metal blades can be used multiple times and make it easier to do any type of cutting.
Make sure your circular saw blade is not in direct contact with anything flammable when it’s plugged in. Do not damage any combustible materials by cutting into them!
Tips And Tricks
- Try tightening the screws that hold your circular saw blade in place if it isn’t cutting straight. If that fails, you might need to replace the whole blade.
- You should take care when working near an outlet or extension cord. You should also avoid running a circular saw near water as it could cause serious injury.
- Keep your hands close to the blade during the operation of your circular saw to avoid kickback. This is when the blade grabs and causes it jump back. You should also ensure that no objects are within six inches of the area you are cutting.
- Always use your circular saw on a flat surface. The blade could slip if you try to cut something on an uneven or inclined surface. This can cause serious damage to your saw as well as the object you are cutting.
Makita Circular Saw Blades: Advantages And Drawbacks
Makita circular saw blade teeth are designed to only cut in one direction. This reduces kickback when your saw is in use.
Makita circular saw blades are durable and can be used multiple times. They are however more expensive than other types of saw blades.
Conclusion
To change the blade of your Makita Circular Saw, use a wrench to tighten and loosen it. You should not touch the blade’s teeth with your fingers, as this could cause injury.
Blades can be used for woodworking or metal cutting. Make sure to choose the right blade for you based on your intended use.
FAQ
Q: How Can You Unlock A Makita Circular-saw?
These steps will unlock the Makita circular saw.
- Take out the battery pack.
- The locking lever is located on the side.
- Move the locking lever towards the Unlock position.
- Close the door and replace the battery pack.
- To make sure the saw is ready for use, test it.
- Alternate top Bevel (ATB) Tooth configuration with anti-kickback for Smooth...
- Reamed bore To ensure précision fit To SPINDLE
- Embedded Tungsten tip
- Supplied with reducing rings
- 160mm diamètre with 20mm bore and 40 Teeth
- Alternate top Bevel (ATB) Tooth configuration with anti-kickback for Smooth...
- Reamed bore To ensure précision fit To SPINDLE
- Embedded Tungsten tip
- Supplied with reducing rings
- 165mm diamètre with 20mm bore and 24 Teeth
- Diamètre : 255 mm.
- Lame TCT à 80 dents, 255 mm x 30 mm.
- Alésage de 30 mm (bagues de réduction de 16, 20 et 25 mm incluses).
- Trait de scie : 2,8 mm.
- Dents en carbure de tungstène pour une longue durée de vie.
- Lame de scie circulaire en carbure de tungstène trempé et durci de qualité...
- 185 mm de diamètre x 80 dents.
- Alésage de 20 mm (anneau de réduction de 16 mm inclus).
- Dents en carbure de tungstène pour une plus longue durée de vie.
- Compatible avec : Evolution, Bosch, Makita, Guild, Skil et beaucoup d'autres...
- Diamètre : 250 mm.
- 80 dents.
- Alésage : 30 mm (bagues de réduction de 16, 20 et 25 mm incluses).
- Trait de scie : 2,8 mm.
- Dents en carbure de tungstène pour une longue durée de vie.
- Dimensions : 185 mm de diamètre – 40 et 80 dents – Alésage de 20 mm (bague...
- [Application] – Idéal pour couper le bois tendre, le bois dur, le...
- Matériau : corps de la lame en acier trempé – Offre une précision et...
- Caractéristiques : intègre un design de dents décalées ATB (biseau...
- Compatibilité : compatible avec Evolution Dewalt Bosch, Makita, Ryobi et toute...
- Alternate top Bevel (ATB) Tooth configuration with anti-kickback for Smooth...
- Reamed bore To ensure précision fit To SPINDLE
- Embedded Tungsten tip
- Supplied with reducing rings
- 160mm diamètre with 20mm bore and 60 Teeth
- ✔ 【Coupe de qualité】: les lames de coupe tranchantes avec des dents de...
- ✔ 【Bonne performance】: Cette lame de scie avec une dureté élevée, pas...
- ✔ 【Service】: nous nous soucions du sentiment de chaque client. Si ce...
- ✔ 【Matériaux】: La lame de scie circulaire en excellent carbure qui en...
- ✔ 【Utilisation】: La lame en bois 60T convient à tous les types de coupe...
- Dimensions : 210 mm de diamètre – 100 dents – Alésage de 30 mm (bagues de...
- [Application] – Idéal pour le long du grain et la croix – Coupe sur bois...
- Matériau : corps de lame en acier trempé – Offre une précision et résiste...
- Caractéristiques : intègre un design de dents décalées ATB (biseau...
- Compatibilité : compatible avec Dewalt, Bosch, Makita, Ryobi et toute autre...
- Diamètre : 160 mm.
- Alésage 20 mm (bague de réduction 16 mm incluse).
- 80 dents.
- Dents en carbure de tungstène pour une longue durée de vie.
- Entraînement : 2,4 mm.
