Converting a coping to a scroll saw is a great option if you are looking for an affordable solution or want to be able make bigger projects. This article will walk you through the process step-by-step.
Scroll saws can be used to create intricate patterns and designs in wood. Scroll saws are a special type of saw that can make precise cuts. They are often used to create delicate wooden carvings.
What do you need?
The following materials are required to make a scrollsaw from a coping.
- Coping with saw
- Drill
- Drill bit 3/20 cm
- Fine blade for a Jigsaw
- Tape measure or ruler
- Pencil or marker
- Fine grit sandpaper
- Safety glasses
- Work gloves
- Drill the chuck key
- Phillips head screwdriver
- Hacksaw
- Carpenters level
- Square
- Set of socket wrenches
- Tape measure or ruler
- Hammer
- Optional: Paint or sealant
Making A Scroll Saw From A Coping Saw: Step By Step
Although a scroll saw is an excellent tool for your workshop, it can be quite expensive. You can build your own scroll saw using a coping or handsaw if you don’t have the funds for one. It is very simple and requires only a few basic tools.
- First, remove the blade from your coping saw. You can do this by loosening the screws at the sides of the saw and removing the blade.
- After the blade has been removed, you will need to remove the part of the saw that holds the blade in place. This can be done with a hacksaw, or a Dremel.
- Next, drill a hole at the center of your saw blade.
- The hole must be large enough to allow the coping saw blade through. This can be done with a drill bit, a jigsaw or a hammer.
- After drilling the hole, attach the coping saw to the scroll saw. This can be done by using a screwdriver and inserting screws into the blade.
- Attaching the saw base to your coping saw is the last step. You can attach the saw base to the coping saw using bolts or screws.
After the attachment is complete, you can start cutting. It is an easy way to save money and a fun project. It is easy to do and does not require any special skills. If you are looking for something new, how about making your own scrollsaw? Learn more about Coping Saw vs Scroll Saw
Safety Tips
These are safety tips for making a scrollsaw from a copingsaw:
- When using power tools, always wear safety goggles
- Take care of your surroundings, and don’t touch the blade.
- To avoid inhaling wood dust, use a dust mask.
- Make sure your workspace is clean and clutter-free.
- Follow the manufacturer’s instructions for your specific scroll saw.
- Do not force the blade into the wood.
- You can guide the blade with a light touch and let it do its job.
- Take extra care when working with small pieces.
- Before making any adjustments to the scroll saw or changing blades, always unplug it.
- When the scroll saw is on, do not leave it unattended.
Conclusion
That’s it! Now you have a scrollsaw. If you are looking to save money and have some tools in your garage, this is the project for you. These tools are inexpensive and can be used in many projects around your house. Learn why it takes so long to attach scrollsaw blades.
- Germe, Jean-Bernard (Auteur)
