You will need the right tools to complete a DIY project at home. A hand saw is one of the most important tools that you will need. There are many types of hand saws, and you can find them online or at your local hardware shop.
A wide range of saws can be classified under the umbrella of hand saws. Each saw has its own purpose and can be useful in completing your project. We have provided a comprehensive guide to help you understand everything.
The hand saw types buyers guide will provide information on the different types of hand saws available. It will also describe the purpose of each hand saw and highlight some of the best products.
Different Types Of Hand Saws
The hand saw is a machine that you use manually to cut materials. It is quite self-explanatory. You can use a hand saw to cut:
- Soft wood
- Hard wood
- Non-ferrous metal
- Plastic
The term hand saw covers a wide range of products. It is similar to the term electric saw, which encompasses many tools. Here is a quick overview of the most popular hand saw types.
Hacksaw
The most popular type of hand saw is the hacksaw. Hacksaws feature a bow-shape and a thick handle. A thin blade is located at the bottom of the saw. This saw has a tool at its end that allows you to adjust the blade’s rigidity. It is important to be able to adjust tension, as this can prevent twisting and bending of more tough materials. compared the top hacksaws side-by-side.
You can also replace the blade with the tool. The blade can be replaced with a finer or coarser one. Hacksaws are designed to cut on the push stroke. However, you can replace the blade by flipping it so that it cuts on the pull stroke. Hacksaws work best for:
- Trimming
- Reduce Plastic
- Cutting Metal
Carpenter Saw
Another common type of hand saw is the carpenter saw. The carpenter saw is completely one-piece, unlike the hacksaw which has a narrow blade at the base and an opening in its middle. The handle is attached directly by a thick piece of metal.
Carpenter saws are designed by manufacturers to release wood as they cut. These saws are useful and can help you complete a job quickly. They cut using both the push-pull stroke. TPI is a term that you will likely see when shopping for carpenter tools. TPI stands to Teeth per Inch. TPI is the number of teeth per inch a saw has. This determines how fine the cut will be.
Carpenter saws work best when cutting wood, particularly square lumber. These saws are great for cutting across the grain. For fast cuts, a TPI of six to seven is a good choice. However, you might need to sand the cut afterwards.
A TPI of ten represents the middle of the road. Many consider it to be general-purpose. A TPI of 12 can be used for finer woodworking projects that require a smooth cut.
Coping With Saw
Although the blade is longer, a coping saw looks very similar to a hacksaw. The coping saw has a deep, bowed design with a handle that is similar to a screwdriver’s. You can adjust the tension of the blade on a copingsaw and quickly replace it.
When cutting complex shapes or patterns, the coping saw’s thin blade is very useful. Although the hack saw can be bulky and cuts in straight lines, the coping saw can be maneuvered to cut different angles and curves. A coping saw can also be used to cut soft woods, such as crown molding or baseboards, which is not possible with the hacksaw.
Jab Saw
The jab saws are similar to what you would use to carve a pumpkin. You would wrap your hand around the handle to make it small and cylindrical. A long blade extends outward from the handle. You may associate jab saws with the kitchen knives you already have. Other names for jab saws include:
- Drywall saw
- Keyhole saw
- Compass saw
A jab saw blade has a stiff blade and a sharp tip. You can cut many different patterns and curves with the blade’s shallow profile. This saw is not recommended for cutting through thick materials because of its shallow blade. The jab saw might be useful if you are looking to cut through drywall for a piece pipe.
Backsaw
Although backsaws are somewhat similar to a carpenter’s saw, the handle looks more like a screwdriver. The handle is usually lower than the blade. You will also notice a thick ridge at the blade’s edge. This helps you to make your cuts with precision and control.
The backsaw’s teeth are very fine and make it the best tool for precise cuts. This saw is useful for cutting floorboards or wood joints, among other things. Backsaws may also be labeled with the following:
- Mitre saws
- Dovetail saws
- Pull saws
Because it cuts on the pull stroke, the backsaw is unique. Carpenter saws use force because they cut using the downward push stroke. A backsaw, however, relies on blade tension to make the right cut. It works on the pull stroke. It is likely that you will find that the pull stroke cuts better than those used by carpenters.
5.128 Cms Best Handsaws
After you have identified the hand saw that you will need to complete your DIY project you’ll need to search for a tool that is reliable. Trust your saw when it is most needed. We are here to help. We’ve listed the top hand saws below.
DEWALT 5-in-1 Hacksaw
A 5-in-1 DEWALT hacksaw is a great option. It costs around €70. The sleek design includes an ergonomic handle and a modern design that allows for easy gripping.
This hacksaw is also unique in that it can make cuts at 45 degrees and 90 degrees. This hacksaw can make standard and flush cuts from different angles. The hacksaw also features a highly adjustable tension system. The DEWALT 5-in-1 Hacksaw Blade can hold 150 kg at its highest setting.
This hacksaw is also easy to use, making it ideal for cutting in tight spaces. The blade was attached to the front frame by DEWALT, which gives the saw a very long reach. This saw’s blade length is 30 cm. The overall dimensions of the saw are approximately 46 cm x 24cm x 17cm. The saw is less than three pounds.
What We Like
- Users can cut at angles
- It is easy to adjust the blade
- Lightweight design and ergonomic handle
What could be better?
- Some people find it difficult to see the blade while using the tool.
- Customers complained that the blade tension mechanism was difficult to use.
Stanley SharpTooth Carpenter Saw
The SharpTooth Carpenter Saw by Stanley is a great choice if you are looking for a carpenter’s saw, but don’t worry about the TPI. Customers can buy it for as low as €99, and the SharpTooth Saw comes standard with a 38 cm blade, nine TPI, which are slightly lower than average. This saw is ideal for cutting quick pieces of lumber.
The three-sided tooth design is one of the most distinctive features on this carpenter’s saw. This saw cut nearly 50% faster than other carpenter tools during testing. You will also likely discover that this product is very durable. This saw’s teeth can stay sharp for up to five times longer that other carpenter tools.
This carpenter’s saw has strong teeth that can cut through plastic pipes. It measures 46 cm by 15 cm by 3 cm and is slightly heavier than 397g.
What We Like
- Wood is easily cut with the three-sided tooth design
- Ideal for routine cuts
- A durable blade is an investment that will endure
What could be better?
- Some people found it difficult to make straight cuts.
- It could be a little more comfortable.
BAHCO 301 17cm Coping Saw
This BAHCO coping saw is a great choice. This saw’s blade measures 17 cm in length. This coping saw’s frame is made of nickel-plated steel. This increases its durability. The handle of this saw is made from orange-lacquered wooden beech. The handle is not only beautiful, but it’s also comfortable to hold.
It is likely that the blades of the coping saw can be replaced easily. The blades are held on by retaining pins that can be easily removed. Blades are very durable. BAHCO blades are made of hardened and temper carbon steel. This ensures that they can be used to complete your project.
Customers will be pleased to know that the included blade has a 14 TPI which allows them to make high-quality cuts. It measures approximately 28 cm by 28 cm by 18 cm, and weighs less that ten ounces. This saw is available for as low as €9.99
What We Like
- The sturdy saw can be used to cut through thick materials
- It is easy to replace the blade
- When cutting, the blade won’t become stuck
What could be better?
- Customers complained that the handle and blade holder were not parallel.
- Customers complained that it was difficult to maintain tension on the blade.
Stanley Jab Saw With Cushion Grip
This Stanley product is the best choice for you if you are looking for a jabsaw. This tool is extremely affordable as it can be purchased for as low as €. However, the blade is very durable and will last you a lifetime. Stanley created the blade with a hardened and tempered design, which makes it more durable than any other jabsaws on the marketplace.
This jab saw is also unique because of its sharp tip. This is a great tip for making plunge cuts with your tool. The unique design of this product’s teeth means that you will have no problems cutting once you have made your plunge cut. Stanley designed this saw to ensure that the teeth are fast and don’t clog.
Stanley used epoxy-bonding to secure the blade to its handle. The blade should not be able to come loose from the handle. Youll also likely find that the grip is quite comfortable to hold, thanks to its ergonomically-designed curved shape.
It measures approximately 2 cm x 15cm x 52cm and weighs less that five ounces.
What could be better?
- It does not include a cover
- Customers complained that their cuts were too jagged.
Gyokucho Razor Ryoba Blade Backsaw
This Gyokucho tool is a great choice if you are looking for a backsaw. This tool has a double-sided blade. You have one side with coarse teeth, which are great for rip work. You also have finer teeth, which are ideal for crosscut work. This blade is also.5mm thick. It will give you a precise cut.
Because of its grip, this product is also a favorite backsaw. Gyokucho wraps your saw’s handle in rattan to make it more secure. The grip should be comfortable regardless of whether you’re wearing gloves or sweaty from hard work.
Customers will also appreciate the ease of changing the blades. The handle is 20 cm long and the blade is 18 cm in length. You can also access places that may otherwise be difficult by tilting the handle. It weighs in at less than five ounces. This tool is available for as low as
What We Like
- You can make any cut quickly with the double-sided blade
- You can access places that are otherwise difficult to reach with the tilted handle
- Durable handle
What could be better?
- The blade can dull quite quickly
- A small backsaw is not necessary
Hand Saw Tips
These tips will help you, no matter if you’re just starting to use a handsaw for the first time or an experienced user who wants to improve your efficiency with your tools.
A quality blade can be a worthwhile investment. A higher quality blade will require you to use fewer strokes when cutting. A high-quality blade will save you time and money over the long term. You won’t need to replace it as often.
Second, look out for blades with deep gullets. Deep gorges will allow you to release more material as you cut. You will need to stop cutting to remove any excess material. This could cause you to slow down. Make sure your blade has gullets that allow for continuous cutting without stopping.
If you have only one choice, we recommend a carpenter’s saw. Carpenter saws are universal handsaws that can be used for a wide range of tasks. This is why most people consider them to be universal. You might also consider 5-in-3 cm and 3-in-3 cm saws, which combine multiple features into one tool.
Conclusion
You will need the right tools if you want to finish a project in a weekend. There are many hand saws. Plan your project carefully so you have a better idea of which tools you will need. You should find it easy to complete your project once you have the tools.
We have provided what we consider to be the most high-quality hand saws on the market. We offer affordable saws.
The entire list can be purchased for just around £20. These tools are very durable and will last for many years.
